10W 120-350mA TRIAC, ELV & 0-10V Dimmable LED Driver
A compact 10W constant-current LED driver with selectable 120–350mA output, supporting 0-10V, TRIAC and ELV dimming for smooth, flicker-free indoor LED lighting. It operates from 120–277VAC, provides a 9–45V output range and supports TRIAC/ELV phase-cut dimming at 120VAC.
- 120–350mA Selectable Constant Current
- 6W–10W Output Power
- 9–45V Output Range
- 0-10V + TRIAC + ELV Dimming
- 0.3%–100% Dimming Range
- 120–277VAC Wide Input
- Single-Channel Output
- Flicker-Free Dimming
Technical Parameters
| Model | PUP10AT-1WPC |
| Product Type | Constant Current Dimmable LED Driver |
| Rated Power | 6W–10W |
| Input Voltage | 120–277VAC |
| Input Frequency | 50/60Hz |
| Output Current | 120–350mA, Software Selectable |
| Output Voltage | 9–45V |
| Max. No-Load Output Voltage | 59V |
| Output Channels | 1 |
| Current Accuracy | ±5% |
| Low-Frequency Ripple Current | 5% |
| Dimming Type | 0-10V, TRIAC & ELV |
| TRIAC / ELV Operating Input | 120VAC, 60Hz |
| 0-10V Dimming Range | 0.3%–100% |
| TRIAC / ELV Dimming Range | 0.3%–100% |
| 0-10V Dimming Curve | Linear |
| TRIAC / ELV Dimming Curve | Logarithmic |
| Efficiency | 74% @ 120VAC, Full Load |
| Power Factor | 0.95 @ 120VAC; 0.80 @ 277VAC, Full Load |
| THD | 12% @ 120VAC; 30% @ 277VAC, Full Load |
| Input Current | 0.15A Max @ 120VAC; 0.08A @ 277VAC |
| No-Load Power | <2.5W |
| Protection | Over Voltage, Overload, Short Circuit |
| Flicker | Flicker Free |
| Power Supply Class | Class 2 |
| Safety Standards | UL8750, UL1310, CSA 250.13, CSA Class P |
| IP Rating | IP20 |
| Housing Material | PC |
| Operating Temperature | -20°C to +50°C / -4°F to 122°F |
| Relative Humidity | 20–90% RH |
| Lifetime | 50,000 Hours @ tc 80°C |
| Switching Cycles | >25,000 Times |
| Dimensions | 75 × 35 × 26.5 mm / 2.95 × 1.38 × 1.04 in |
| Net Weight | Approx. 173 g / 0.38 lb |
| Warranty | 5 Years |
| Installation Requirement | Use Only Within an Enclosure |
How Dimming Works
How Dimming Works
How Adjustable Current Works
How Adjustable Current Works
You May Also Like
10W 120–350mA DALI Dimmable LED Driver
Choose your option
20W 350–700mA 0/1-10V Dimmable LED Driver
Choose your option
30W 500–1050mA TRIAC & 0–10V Dimmable Constant Current LED Driver
Choose your option
12–24VDC 4-Channel DMX512/RDM RGBW Decoder
Choose your option
Shop with Confidence
Free Shipping
All orders over $99 are delivered to your doorstep at no extra charge.
30-Days Free Returns
Enjoy the freedom of stress-free shopping with our hassle-free and return policy.
Secure Payment
Shop with confidence knowing your payments are secure and your information
How do I choose the right product for my project?
How do I choose the right product for my project?
Start by confirming your input power supply, required output type, voltage or current, total load, control method and installation environment. Refer to the specifications on each product page before placing an order.
How can I check whether this product is compatible with my lighting system?
How can I check whether this product is compatible with my lighting system?
Compare the product specifications with your existing system, including input voltage, output requirements, dimming or control protocol, and load capacity. For accessories and programming tools, please check the listed compatible models.
Where can I find technical specifications and wiring information?
Where can I find technical specifications and wiring information?
Technical parameters, dimensions and available product information are provided on the product page. Please follow the applicable wiring diagram and installation instructions for your selected model.
Is professional installation recommended?
Is professional installation recommended?
Installation should be completed by a qualified electrician or lighting professional where mains wiring or system commissioning is required. Always disconnect power before installation and follow local electrical codes.
Need help selecting a product or configuring a system?
Need help selecting a product or configuring a system?
Contact our team with your project requirements, including input voltage, LED load, required control method, quantity and installation conditions. We will help you identify a suitable solution.
