30W 0/1–10V Constant Current LED Driver
A 30W single-channel constant-current LED driver with a programmable 100–1050mA output range. It supports 0/1–10V active signal, adjustable resistance and PWM dimming for compatible commercial LED lighting applications.
- 30W single-channel constant-current output
- 100–1050mA programmable current range
- 0/1–10V, adjustable resistor and PWM dimming
- 120–277VAC wide input voltage range
- 12VDC, 200mA max. auxiliary power supply
- IP20 for dry and damp environments
Technical Parameters
Model: EULP30AS-1WPC
Input
| Efficiency | ≥87%@120VAC,full load |
|---|---|
| Rated Voltage | 120-277VAC |
| Frequency Range(Hz) | 50/60Hz |
| Electric current(Typical) | 0.28A@120VAC 0.13A@277VAC |
| PF | ≥0.90@120VAC, 277VAC, Full load |
| THD | ≤10%@120VAC, ≤20%@277VAC |
| Surge current | Cold start, 18.00A@120VAC 14us, 42A@277VAC 5us |
| Standby power | <2.5W |
| No-load power consumption | <2.5W |
| Start delay | 0.5s@120VAC, (When the light starts to illuminate) |
Output
| Current Range | 100-1050mA (Default Current:1050mA) |
|---|---|
| Current Accuracy | ±5% |
| Output voltage range | 10-55VDC |
| output power | 30W max |
| Output channel | 1 |
| Over power limit | ≥110% |
| Ripple factor | ≤300mV |
| Frequency | 20KHz PWM |
Function
| Dimming Type | 0-10V |
|---|---|
| Dimming Range | 1%-100% |
| Dimming curve | Linear/Logarithmic Adjustable |
| Flicker | Flicker free |
Protection
| Overvoltage | Shut down output, Auto-recovery after Fault Clearance |
|---|---|
| Overload | Reduce current burp protection, Auto-recovery after Fault Clearance |
| Overvoltage | Shut down output, Auto-recovery after Fault Clearance |
| Over Temperature | Reduce current burp protection, Auto-recovery after Fault Clearance |
Safety & EMC
| Surge | L-N: 2.0kV L-N-PG: 4kV |
|---|---|
| Withstand Voltage | I/P-O/P:2000Vac/1min/<5mA I/P-PG:1500Vac/1min/<5mA O/P-PG:500Vac/1min/<5mA |
| Safety Standards | UL8750, CSA-C22.2 No.250.13, US LED Driver Class 2, UL Class P |
| EMI | FCC 47CFR Part 15 CLassA |
| Insulation impedance | 10MΩ |
Others
| Working Temp. | (-20~+50)°C [-4°F~122°F] |
|---|---|
| Storage Temp., Humidity | (-40~+90)°C [-40°F~194°F], 20%-90%RH |
| tc | 90℃(194°F) |
| Material | Metal |
| IP Rating | IP20 |
| Lifetime | 50,000h@tc85℃ (185°F) |
| Warranty Condition | 5years |
| Switch Cycle | >25,000 times |
| Packaging size (weight) | Net weight: 212g |
| size | 280×30×21mm (11.01×1.18×0.82 Inch) (L*W*H) |
Dimming & Programming
Dimming & Programming
Installation & Compatibility
Installation & Compatibility
You May Also Like
10W 120–350mA DALI Dimmable LED Driver
Choose your option
20W 350–700mA 0/1-10V Dimmable LED Driver
Choose your option
30W 500–1050mA TRIAC & 0–10V Dimmable Constant Current LED Driver
Choose your option
12–24VDC 4-Channel DMX512/RDM RGBW Decoder
Choose your option
Shop with Confidence
Free Shipping
All orders over $99 are delivered to your doorstep at no extra charge.
30-Days Free Returns
Enjoy the freedom of stress-free shopping with our hassle-free and return policy.
Secure Payment
Shop with confidence knowing your payments are secure and your information
How do I choose the right product for my project?
How do I choose the right product for my project?
Start by confirming your input power supply, required output type, voltage or current, total load, control method and installation environment. Refer to the specifications on each product page before placing an order.
How can I check whether this product is compatible with my lighting system?
How can I check whether this product is compatible with my lighting system?
Compare the product specifications with your existing system, including input voltage, output requirements, dimming or control protocol, and load capacity. For accessories and programming tools, please check the listed compatible models.
Where can I find technical specifications and wiring information?
Where can I find technical specifications and wiring information?
Technical parameters, dimensions and available product information are provided on the product page. Please follow the applicable wiring diagram and installation instructions for your selected model.
Is professional installation recommended?
Is professional installation recommended?
Installation should be completed by a qualified electrician or lighting professional where mains wiring or system commissioning is required. Always disconnect power before installation and follow local electrical codes.
Need help selecting a product or configuring a system?
Need help selecting a product or configuring a system?
Contact our team with your project requirements, including input voltage, LED load, required control method, quantity and installation conditions. We will help you identify a suitable solution.
