40W 800–1200mA TRIAC & 0–10V Dimmable Constant Current LED Driver
A single-channel constant-current LED driver with software-selectable 800–1200mA output. PUP40AT-1WPC supports 0–10V, TRIAC and ELV dimming for compatible indoor LED lighting applications.
- 40W maximum constant-current output
- 800–1200mA software-selectable output current
- 120–277VAC input
- Compatible with 0–10V, TRIAC and ELV dimmers
- Class 2 power supply
- IP20 enclosure for indoor applications
Model
| Model | PUP40AT-1WPC |
Input
| Efficiency | 85%@120VAC, Full load |
| Frequency | 47-63Hz |
| Voltage | 120VAC-277VAC |
| Current | 0.42Amax@120VAC, 0.25A@230VAC, 0.21A@277VAC |
| PF | 0.95@120VAC, 0.9@277VAC, Full load |
| THD(full load) | 10%@120VAC, 20%@277VAC, Full load |
| Inrush Current | Cold start,6A@120VAC 31us 15A@277VAC 28us |
| Standby power | <2.5W |
| No load power | <2.5W |
| Turn on delay Time | ≤ 0.75s, at230Vac (When the light begins to shine) |
Output
| Current | 800-1200mA |
| Voltage | 9-45V |
| Power | 36W-40W |
| Channel | 1 |
| No load output voltage | 59V Max |
| Current Accuracy | ±5% |
| Over power limit | ≥120% |
| Ripple | ≤ 60mA |
| PWM Frequency | 20K Hz |
Protection
| Over Voltage | Reduce current protection, restore normal operation after troubleshooting |
| Over load | Reduce current protection, restore normal operation after troubleshooting |
| Short circuit | No output, self recovery after removing the fault |
Function
| Dimming type | 0-10V, TRIAC/ELV(@120VAC 60Hz) |
| Dimming range | 0.5%-100%(0-10V) 1%-100%(TRIAC/ELV) |
| Dimming curve | 0-10V: (Linearity) TRIAC/ELV: (Logarithm) |
| Flicker | Flicker free |
Safety & EMC
| Surge | L-N:2.5KV (ANSI/IEEE C62.41.1-2002 & c62.41.2-2002 category A, 2.5 kV ringwave) |
| Withstand Voltage | I/P-O/P: 2000Vac/1min/<5mA O/P-DIM( Signal port ):1500Vac/1min/<5mA |
| Safety standards | UL8750/UL1310/CSA25013,CSA class P |
| EMI Eission | EN55015,EN61000-3-2 Class C,IEC61000-3-3 |
| EMC Immunity | FCC class B(120V)/class A(277V) |
Other Specifications
| IP rating | IP20 |
| Working temp. | (-20℃~+50℃) [-4°F~122°F] |
| Relative humidity | 20℃~90%℃ RH |
| tc | 90℃ [194°F] |
| Lifetime | 50,000h@tc:85 [185°F] |
| Warranty Condition | 5 years |
| Switch cycle | >25,000 times |
| Material | PC |
| Dimension | 88*43*26.5mm (3.46*1.69*1.04 Inch)(L*W*H) |
| Pack Information | N.W: 173g(0.38 lb)±5%/PCS; 100PCS/Carton; 17.8kg(39.2Ib)±5%/Carton; Carton Size: 398x210x208mm(15.7*8.26*8.19 Inch)(L*W*H) |
| Remark | Use only within an enclosure |
Dimming & Output Selection
Dimming & Output Selection
Protection & Operating Conditions
Protection & Operating Conditions
You May Also Like
10W 120–350mA DALI Dimmable LED Driver
Choose your option
20W 350–700mA 0/1-10V Dimmable LED Driver
Choose your option
30W 500–1050mA TRIAC & 0–10V Dimmable Constant Current LED Driver
Choose your option
12–24VDC 4-Channel DMX512/RDM RGBW Decoder
Choose your option
Shop with Confidence
Free Shipping
All orders over $99 are delivered to your doorstep at no extra charge.
30-Days Free Returns
Enjoy the freedom of stress-free shopping with our hassle-free and return policy.
Secure Payment
Shop with confidence knowing your payments are secure and your information
How do I choose the right product for my project?
How do I choose the right product for my project?
Start by confirming your input power supply, required output type, voltage or current, total load, control method and installation environment. Refer to the specifications on each product page before placing an order.
How can I check whether this product is compatible with my lighting system?
How can I check whether this product is compatible with my lighting system?
Compare the product specifications with your existing system, including input voltage, output requirements, dimming or control protocol, and load capacity. For accessories and programming tools, please check the listed compatible models.
Where can I find technical specifications and wiring information?
Where can I find technical specifications and wiring information?
Technical parameters, dimensions and available product information are provided on the product page. Please follow the applicable wiring diagram and installation instructions for your selected model.
Is professional installation recommended?
Is professional installation recommended?
Installation should be completed by a qualified electrician or lighting professional where mains wiring or system commissioning is required. Always disconnect power before installation and follow local electrical codes.
Need help selecting a product or configuring a system?
Need help selecting a product or configuring a system?
Contact our team with your project requirements, including input voltage, LED load, required control method, quantity and installation conditions. We will help you identify a suitable solution.
